UP-485-C2 UPCOM Bộ chuyển đổi Commercial RS-232 sang RS-485

  • Support RS-232 to RS-485;
  • Port-powered, no external power is required;
  • Plug and play (hot-pluggable);
  • Built-in 600W surge protection, 15kV static protection and circuit protection;
  • Supports up to 128 nodes of RS-485 devices;
  • Working temperature range:-40~85°C;

Mô tả

The UP-485-C2 is a compact, rugged, industrial-grade, port-powered RS-232 to RS-485 converter, which can be used to convert any standard RS-232C port into a two-wire half-duplex RS-485 port and vice versa. It supports multi-drop RS-485 networks and can be used to communicate with one loop of up to 128 units of RS-485 devices, it requires no external power, software drivers, or flow control.

UP-485-C2 is port-powered or DC5V external power supply, which has small size, long distance, stable performance and other characteristics. the device is easy to install and meet the needs of industrial field serial port data conversion, and are widely used in intelligent power management, power system automation, water conservancy monitoring, industrial automation, distributed data acquisition and other occasions.

Đặc trưng

  • Support RS-232 to RS-485;
  • Port-powered, no external power is required;
  • Plug and play (hot-pluggable);
  • Built-in 600W surge protection, 15kV static protection and circuit protection;
  • Supports high-speed serial data rates: 300 to 115,200bps;
  • Supports up to 128 nodes of RS-485 devices;
  • External 5VDC regulated power is acceptable if the port power is insufficient;
  • Data direction auto-turnaround, no software drivers or flow control is required;
  • Built-in selectable 120Ω end-of-line terminator for system reliability and easy installation;
  • Working temperature range:-40~85°C;

Thông số kỹ thuật

Technical parameters
Standard Compliant  with EIA RS-232, RS-485
Connector RS232:  DB-9 Female
RS485  Side: DB-9 Male
Termination  Board: DB-9 Female and a 4-Way Terminal Block
Baud Rate 300bps~115.2Kbps
Power
Power Supply Serial Port Powered, External supply DC5V
Interface DB9 interface, industrial terminal block
Lightning protection 600W
Static protection 15KV
Physical Characteristics
Shell DB9 plastic case
Dimension 87mm×17mm×33mm (H*D*W)
Weight 30g
Transmission distance
Serial port line RS-232, 15m@9600bps
RS-485, 1.2km@9600bps
Working Environment
Working Temp -40~85°C
Storage Temp -40~85°C
Relative Humidity 5%~95% (no-condensation)

Download

Tham khảo thêm các sản phẩm khác của Công ty TNHH Công Nghệ và Viễn Thông Hải Phong chúng tôi

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “UP-485-C2 UPCOM Bộ chuyển đổi Commercial RS-232 sang RS-485”

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *

X