Switch công nghiệp quản lý Layer 3 16 cổng Gigabit Ethernet + 4 cổng quang 10Gigabit SFP + 8 cổng Combo Gigabit SFP 3Onedata ICS5428-16GT8GC4XS-2P220

Model: ICS5428-16GT8GC4XS-2P220

  • Support 4 Gigabit/10Gigabit fiber ports (SFP slots), 8 Gigabit Combo (SFP slots or RJ45) and 16 Gigabit copper ports
  • Adopt SW-Ring patented technology, support single ring, coupling ring, chain, Dual-homing, automatic recovery time of network failure < 20ms
  • Support ERPS and loop detection, which can eliminate loop effectively and prevent broadcast storm caused by data loop
  • 10 Gigabit bandwidth can transmit large amounts of video, voice and data with high performance and high speed
  • Support optional dual AC/DC power supply, input voltage: 100~240VAC/ DC or 36~72VDC
  • Support -40~75℃ wide operating temperature range

Mô tả

ICS5428 series is 28-port Gigabit/10 Gigabit layer 3 industrial Ethernet switch. It provides 10 Gigabit SFP slots, Gigabit SFP slots, Gigabit PoE port, Gigabit copper ports and Gigabit fiber and copper multiplexing port. It adopts 1U rack mounting. PoE power supply conforms to IEEE802.3af/at protocol standard, and it can power device over Ethernet, thus decreasing the cable connection of powered devices. Abundant numbers of interfaces, bandwidth of Gigabit/10Gigabit combination and ability to transmit large amounts of video, voice and data with high performance and high speed meet the application requirements of large-scale industrial network.

Network management system supports a variety of network protocols and industry standards, such as ARP, VRRP, RIP, OSPF, BGP, NAT, ERPS, STP/ RSTP/MSTP, 802.1Q VLAN, QoS function, IGMP Snooping static multicast function, LLDP, port trunking, port mirror, etc. It has perfect management functions, supporting port configuration, port statistics, 802.1X authentication, network diagnosis, rapid configuration, online upgrade, loop detection, etc. CLI, WEB, Telnet, SSH, SNMP and other access methods can be supported. It can provide users with good experience with friendly design of network management system interface, simple and convenient operation.

This product supports optional dual AC/DC power supply. The input power supply is two independent power supply circuits which can ensure the normal operation of the device when one power supply fails. When power supply or port has link failure, ALARM indicator will be bright and send out alarm, meanwhile, alarm device connected to the relay will send out alarm for rapid scene troubleshooting. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in smart grid, rail transit, smart city, safety city, new energy, intelligent manufacturing and other industrial fields.

 

ĐẶC TRƯNG

 

  • SNMPv1/v2c/v3 is used for network management of various levels
  • RMON can be used for efficient and flexible network monitoring
  • Port mirroring can conduct data analysis and monitoring, which is convenient for online debugging
  • QoS supports real-time traffic classification and priority setting
  • LLDP can achieve automatic topology discovery, which is convenient for visual management
  • DHCP server can be used for distributing IP address with different strategies
  • File management is convenient for the device rapid configuration and online upgrading
  • Log management records the information of booting, operation and connection
  • Bandwidth management can reasonably distribute network bandwidth, preventing unpredictable network status
  • Port statistics can be used for the port real time traffic statistics
  • ARP could be used for MAC address resolution
  • User password can conduct user hierarchical management to improve the device management security
  • ACL can enhance network flexibility and security
  • Relay alarm is convenient for troubleshooting of construction site
  • Storm suppression can restrain broadcast, unknown multicast and unicast
  • TELNET configuration and HTTPS configuration guarantee secure access to data
  • VLAN is used for simplifying network planning
  • Port Trunking and LACP can increase network bandwidth and enhance the reliability of network connection to achieve optimum bandwidth utilization
  • PIM-DM/PIM-SM/PIM-SSM, IGMP Snooping, GMRP and static multicast can be used for filtering multicast traffic to save the network bandwidth
  • Bandwidth management and flow control can reasonably distribute network bandwidth, preventing unpredictable network status
  • Port isolation could achieve port isolation in the same VLAN and save VLAN resources
  • Ring and STP/RSTP/MSTP can achieve network redundancy, preventing network storm
  • Ping, Traceroute, Port Loopback and SFP Digital Diagnosis could achieve network diagnosis and troubleshooting
  • VRRP, RIP, OSPF, BGP could achieve dynamic routing configuration
  • With high reliability and stability, ERPS could avoid broadcast storm caused by data loopback
  • Loop detection could efficiently eliminate the influence caused by port loopback by detecting the existence of loopback

 

THÔNG SỐ KỸ THUẬT

 

Standard & Protocol IEEE 802.3 for 10Base-T 

IEEE 802.3u for 100Base-TX

IEEE 802.3ab for 1000Base-T

IEEE 802.3z for 1000Base-X

IEEE802.3ae for 10GBase-X SFP+

IEEE 802.3x for Flow Control

IEEE 802.1D for Spanning Tree Protocol

IEEE 802.1w for Rapid Spanning Tree Protocol

IEEE 802.1s for Multiple Spanning Tree Protocol

IEEE 802.1Q for VLAN

IEEE802.1p for CoS

IEEE 802.1X for 802.1X Authentication

IEEE 802.1AB for LLDP

IEEE 802.3af for PoE

IEEE 802.3at for PoE+

Management SNMP v1/v2c/v3 Centralized Management Devices, RMON, Port Mirroring, QoS, LLDP, DHCP Server, File Management, Log Management, Port Statistics, ARP, PoE management
Security User permission rating, ACL, 802.1X authentication, port alarm, power alarm, storm suppression, Telnet configuration, SSH configuration, link flapping protection, NAT, DHCP snooping, loop detection
Switch Function 802.1Q VLAN, Port Trunking, Bandwidth Management, Flow Control, Port Isolation
Unicast / Multicast Static Multicast, Multicast Passthrough, GMRP, IGMP-Snooping, PIM-SM, PIM-DM
Redundancy Technology Ring, STP/RSTP/MSTP, ERPS
Troubleshooting Ping, Traceroute, Port Loopback, SFP Digital Diagnosis
Routing Technique VRRP, RIP, OSPF, BGP
Time Management NTP
Interface Gigabit copper port: 10/100/1000Base-T(X) self-adaptive RJ45, automatic flow control, support full/half duplex mode, MDI/MDI-X self-adaption 

Gigabit PoE:10/100/1000Base-T (X) self-adaptive RJ45, automatic flow control, support full/half duplex mode, MDI/MDI-X self-adaption; The maximum capacity of a      single port is 30W PoE power supply output. Pin 1 and 2 of PoE power supply are positive, while Pin 3 and 6 are negative

Gigabit SFP: 100/1000Base-X self-adaptive SFP slot

10Gigabit SFP+: 1000/10GBase-X self-adaptive SFP+ slot

Combo port: 10/100/1000Base-T(X) RJ45 or 1000Base-X SFP slot

Console port: CLI command line management port(RS-232), RJ45

Alarm port: 2 5-pin 5.08mm pitch terminal blocks(relay occupies 2 pins), support 2 relay alarm outputs, current loading capacity is 5A/30VDC or 10A/125VAC

Indicator Run indicator, interface indicator power indicator, alarm indicator, PoE indicator
Switch Property Transmission mode: store and forward 

MAC address: 16K

Packet buffer size: 12Mbit

Backplane bandwidth: 128G

Power Supply ICS5428-16GT8GC4XS-2P220 

Input voltage: 220VAC (100~240VAC/DC)

Redundant power supply: support dual power supply redundancy

Overcurrent protection: 5A

Access terminal: single-phase socket with rocker switch

ICS5428-16GT8GC4XS-2P48

Input voltage: 48VDC (36~72VDC)

Redundant power supply: support dual power supply redundancy

Overcurrent protection: 3A

Connection protection: anti-reverse connection

Access terminal: 5-pin 5.08mm pitch terminal blocks (power supply occupies 2 pins)

ICS5428-16GT8GC4XS-2P24

Input voltage: 24VDC (18~72VDC)

Redundant power supply: support dual power supply redundancy

Overcurrent protection: 3A

Connection protection: anti-reverse connection

Access terminal: 5-pin 5.08mm pitch terminal blocks (power supply occupies 2 pins)

ICS5428-16GP8GC4XS-2P48

Input voltage: 48VDC

Redundant power supply: support dual power supply redundancy

Overcurrent protection: 3A

Connection protection: anti-reverse connection

Access terminal: 5-pin 5.08mm pitch terminal blocks (power supply occupies 2 pins)

Power Consumption No-load: 10.5W@220VAC 

Full-load: 25.3W@220VAC

PoE device with POE load, the maximum power is 240W

Working Environment Operating temperature: -40~75℃ 

Storage temperature:-40~85℃

Relative humidity: 5%~95% (no condensation)

Physical Characteristic Housing: IP30 protection, metal 

Installation: 19-inch 1U rack mounting

Weight: 3940g

Dimension (W x H x D): 440.4mm×44mm×304.8mm

Industrial Standard IEC 61000-4-2 (ESD, electrostatic discharge), Level 3 

Air discharge:± 8kV

Contact discharge: ±6kV

IEC 61000-4-4 (EFT, electrical fast transient), Level 3

Power supply: ±2kV

Signal: ±1kV

IEC 61000-4-5 (Surge), Level 3

Power supply: differential mode±1kV, common mode±2kV

Signal: differential mode±1kV, common mode±2kV

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6

Authentication CE, FCC, RoHS

 

Download

Tham khảo thêm các sản phẩm khác của Công ty TNHH Công Nghệ và Viễn Thông Hải Phong chúng tôi

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Switch công nghiệp quản lý Layer 3 16 cổng Gigabit Ethernet + 4 cổng quang 10Gigabit SFP + 8 cổng Combo Gigabit SFP 3Onedata ICS5428-16GT8GC4XS-2P220”

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *

X