Mô tả
PIES1010G-2GS-8P-BT Industrial PoE Switch, support 8-port Gigabit PoE(1-2 Port Support bt:90W) + 2-port Gigabit SFP + 1 Console port, DIN-Rail & Wall mounts installation, support power input (DC48-55V), working temperature -40-75°C, the reliable industrial design can ensure the stability of the system without interruption.
This series of Industrial PoE switches provide advanced network management capabilities: Redundant Ring, Loop protection, VLAN, QOS, Speed control, Port Mirroring, and firmware online upgrades. With standardized industrial design, it can meet the stringent requirements of industrial sites. All components use industrial grade for greater reliability, designed and rigorously tested to handle extremely harsh environments subject to a wide range of operating temperature, vibration and sh°Ck, and protection from ESD, EMI and electrical surge.
This series of industrial grade POE switches can be widely used in Intelligent Transportation System, Electric Power, assembly automation, subway PIS, electric power SCADA, sewage treatment, Security Surveillance, rail transportation, military and other industries. It is a low power consumption Industrial Network Switch.
PIES1010G-2GS-8P-BT PoE switches support IEEE802.3af(15.4W), 802.3at PoE+(30W), 802.3bt(90W), save installation and maintenance costs by reducing the need for external power supply, additional wires, power outlet.
Đặc trưng
- Support 8-port Gigabit PoE(1-2 Port Support bt:90W) + 2-port Gigabit SFP + 1 Console port;
- Support IEEE802.3,IEEE802.3u,IEEE802.3x,IEEE802.3z /ab,IEEE802.1Q, IEEE802.1p,IEEE802.1d/w;
- PoE Power Management, PoE Watchdog based on data stream detection;
- Compatible with both IEEE802.3at(30W) and IEEE802.3af(15.4w), IEEE802.3bt(90W);
- Support STP(802.1D), RSTP(802.1w), MSTP(802.1s), ERPS;
- Support SNMP v1/v2/v3;
- Support IGMP Snooping, Static multicast filtering and MLD Snooping;
- Support 802.1x port and AAA Certification, Enhance network security;
- Support WEB, Telnet, CLI, SSH management;
- IP40 protection, rugged high-strength metal case, DIN35 Rail mounting;
- Support Redundant power supply access, support anti-reverse connection;
- Support Port lightning protection, Surge: General Mode 6KV, Differential Mode2KV, ESD: 15KV;
- Support EMC EN55032 standard;
- Industrial grade 4 design, -40-75°C working temperature;
- Support dual power supply DC48-55V;
- Support DIN-Rail or wall Installation;
Thông số kỹ thuật
Specification | |
Product Name | 10 ports Gigabit Managed Industrial POE Switch |
Port Definition | 8-port Gigabit PoE(1-2 Port Support bt:90W)+ 2-port Gigabit SFP+ 1 Console |
Network Protocols | IEEE802.3 |
IEEE802.3u | |
IEEE802.3z | |
IEEE802.3ab | |
IEEE802.3x | |
IEEE802.1d | |
IEEE802.1w | |
PoE Parameters | POE Standard: IEEE802.3at (30W), IEEE802.3af(15.4w), IEEE802.3bt(90w) |
Each port Max:15.4 W (IEEE 802.3af)
Each port Max:30 W (IEEE 802.3at) Each port Max:90 W (IEEE 802.3bt) |
|
PoE Compatibility:IEEE 802.3af/at/bt adaptive | |
POE Power Output: DC48-55V | |
POE Power Pin: 1/2- ; 3/6+ (bt: 1/2- 3/6+;4/5+ 7/8-) | |
Network Media | 10BASE-T: Cat3,4,5 UTP(≤100 m) |
100BASE-TX: Cat5 or above UTP(≤100 m) | |
1000BASE-TX: Cat5 or above UTP(≤100 m) | |
Gigabit Fiber | LC connector |
Multi-mode:850nm,1310nm distance:550m/2Km | |
Single-mode:1310nm,1550nm distance:20/40/80/100/120Km | |
Hardware parameter | |
Bandwidth | 20Gbps |
Package Forwarding Rate | 14.88Mpps |
RAM | 128MB |
Flash | 16MB |
Packet Buffer Memory | 4M |
Jumbo frame | 9.6Kbytes |
VLANs | 4096 |
MAC address | 8K |
Forwarding mode | Store-and-forward |
L2 management | |
Port Management | Support for enabling/disabling ports |
Support speed, duplex, MTU settings, etc. | |
Support flow control flow control settings | |
Support port mirroring | |
Support port in/out direction | |
Support port speed limit | |
Support port isolation setting | |
Unknown unicast, multicast, broadcast storm suppression | |
STP | Standard Spanning Tree (STP) 802.1d |
Rapid Spanning Tree (RSTP) 802.1w | |
Multiple Spanning Tree (MSTP) 802.1s | |
Ring Network Protocol | ERPS |
Link Aggregation | Support static manual aggregation |
Support LACP dynamic convergence | |
VLAN | Support VLAN and IEEE 802.1Q VLAN |
GVRP | Support GVRP, Global configuration, port configuration |
IGMP Snooping | Support static add / delete |
MAC | Support static add/delete |
MAC address learning limit | |
Support dynamic aging time settings | |
L3 ( Layer 3 Switching ) and Router Function | |
Interface Configuration | Support virtual VLAN interface |
ARP | Support check ARP |
Router Function | Static Router |
Extended Function | |
ACL | Based on the source MAC, destination MAC, protocol type, source IP, destination IP, L4 port number |
Support time-range time management | |
QOS | Based on 802.1p (COS) classification |
Based on DSCP classification | |
Based on the source IP, destination IP, port number classification | |
Support SP, WRR, DRR scheduling strategy | |
Support traffic speed limit CAR | |
LLDP | Support LLDP |
User Setting | Support add/delete user |
Log | User login, operation, status, event log |
Port security | Dyning Gasp,SNMP Trap |
Prevent Attack | DOS defense |
Support for CPU protection, limited to send CPU message rate | |
ARP binding (IP, MAC, PORT binding) | |
System Management | Device reset, configuration save/restore, upgrade management, time setting, etc. |
Management Function | |
CLI | Support serial command line management |
TELNET | Support serial command line management |
SSH | Support SSHv1/2 remote management |
SNMP | Support v1/2/3 |
WEB | Support two layers of settings |
PoE | PoE Power management |
LED Indicator | |
PWR | Lighting:Powered |
Off:No Power | |
SYS | Lighting:System is operating normally |
Un-Light:System is not running | |
Yellow light | Lighting:PoE Powered |
Un-Light:No PoE Powered | |
Flashing:Port and device mismatch | |
Green light | Slow Flashing:10/100/1000 Link normally |
Un-Light:Link disconnect | |
Flashing:Link data transmission | |
G9-G10 | Lighting:Fiber Connection is Normal |
Un-Light:Disconnect | |
Flashing:Link data transmission | |
Power Supply | Type of input: 4 PIN Industrial Terminal(block V1+V1- V2+ V2-) |
Input Voltage: DC12~55V | |
Physical structure | Shell protect grade: IP40 |
Installation: DIN rail | |
N.W::0.8KG G.W: 1.1KG(without power supply) | |
Product Dimension (L×W×H): 165MM*130MM*65MM | |
Package Dimension (L×W×H): 245MM*210MM*88MM | |
Working Environment | Operating temperature: -40~75°C |
Storage temperature: -40~85°C | |
Humidity: 5%~95 % ( No condensation) |
Download
Tham khảo thêm các sản phẩm khác của Công ty TNHH Công Nghệ và Viễn Thông Hải Phong chúng tôi
Đánh giá
Chưa có đánh giá nào.