PE101 UPCOM Thiết bị POE Extender 3 cổng 100M

  • Support 3*10/100Base-TX RJ45 ports extend transmission to 200 meters;
  • Support IEEE 802.3af/at PoE standard, without damaging non-PoE devices;
  • Support non-blocking wire-speed forwarding;
  • 2* 10/100Base-TX RJ45 ports can support PoE power supply;
  • Plug and play, no configuration is required, easy to use and maintain;
  • The user-friendly panel shows the device status through the LED indicator of PWR, Link PoE;
  • Support -20~55°C wide operating temperature range;
  • Support CCC,CE, FCC, RoHS standard;

Mô tả

PE101 is an unmanaged PoE extender with 2*10/100M PoE ports and 1*10/100M uplink PD RJ45 port. Port 1-2 can support IEEE802.3af/at PoE standard, single-port PoE power up to 25W. The working power of the PoE extender is taken from the PoE switch and no additional power supply is required. It is installed at the end of the 100 meters network cable to extend the network and POE power supply by 100 meters at full speed. As a PoE power supply device, it can automatically detect and recognize the power receiving equipment that meets the standard and supply power through the network cable. It can supply power to POE terminal equipment such as wireless AP, webcam, VoIP, video access control, etc. through a network cable, to meet the network environment that requires high-density PoE power supply, and to reduce the bandwidth to solve the twisted pair POE transmission within 200 meters. It is suitable for hotels, campuses, factory dormitories, and small and medium-sized enterprises to form a cost-effective network.

Đặc trưng

  • Support 3*10/100Base-TX RJ45 ports extend transmission to 200 meters;
  • Support IEEE 802.3af/at PoE standard, without damaging non-PoE devices;
  • Support non-blocking wire-speed forwarding;
  • Support full-duplex based on IEEE802.3x and half-duplex based on Backpressure;
  • 2* 10/100Base-TX RJ45 ports can support PoE power supply;
  • PoE extender can extend the network signal transmission distance and POE power supply distance;
  • No need external power supply;
  • Plug and play, no configuration is required, easy to use and maintain;
  • The user-friendly panel shows the device status through the LED indicator of PWR, Link PoE;
  • Low power consumption, fan-less silent design with advanced ABS and PC flame-retardant plastic shell;
  • Support -20~55°C wide operating temperature range;
  • Support CCC,CE, FCC, RoHS standard;

Thông số kỹ thuật

Interface Characteristics
Fixed  Port 2*10/100Base-TX  PoE ports (Data/Power)
1*10/100Base-TX  uplink PD RJ45 port (Data/Power)
Ethernet  Port Port  1-3 support 10/100Base-TX auto-sensing, Full/half duplex MDI/MDI-X  self-adaption
Twisted  Pair

Transmission

10BASE-T:Cat  3,4,5 UTP(≤100 meter)
100BASE-TX:Cat  5 or later UTP(≤100 meter)
Chip Parameter
Network  Protocol IEEE802.3  10BASE-T, IEEE802.3i 10Base-T
IEEE802.3u  100Base-TX,IEEE802.3x
Forwarding Mode Store and Forward(Full Wire Speed)
Switching Capacity 1.0Gbps(non-blocking)
Forwarding Rate@64byte 0.45Mpps
MAC 1K
Buffer Memory 512K
Jumbo Frame 1536byte
LED Indicator Power: PWR (green), Data: Link(yellow), POE: PoE (green)
PoE & Power Supply
PoE Port Port 1-2 support IEEE802.3af/at @ POE
Power Supply Pin Default 1/2 (+), 3/6 (-), Optional 4/5(+), 7/8(-)
Max Power Per Port 25W, IEEE802.3af/at (Limited by max input power of at)
Total PWR / Input Voltage 25W (PoE)
Power Consumption Standby<2W,Full load<30W
Input Voltage and Interface PoE (IEEE802.3af/at), RJ45 port connection
Power Supply N/A
Physical  Parameter
Operation TEMP / Humidity -20~+55°C, 5%~90% RH Non condensing
Storage TEMP / Humidity -40~+80°C, 5%~95% RH Non condensing
Dimension (L*W*H) 103*50*29mm
Net /Gross Weight <0.07kg /<0.08kg
Installation Desktop, wall mounted

 

Tham khảo thêm các sản phẩm khác của Công ty TNHH Công Nghệ và Viễn Thông Hải Phong chúng tôi

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “PE101 UPCOM Thiết bị POE Extender 3 cổng 100M”

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *

X