ICS1028-4GS UPCOM Switch công nghiệp 24 cổng Combo 100M + 4 cổng SFP Gigabit

  • Support 24* 10/100Base combo port +4-port Gigabit SFP;
  • Comply with IEC61850-3 standard;
  • Support RIP, OSPF, PIM Layer 3 Routing protocol;
  • Support MW-Ring, MSTP, VRRP, EAPS redundancy network;
  • Support Front and rear indicator lights design;
  • Support dual AC/DC 220V power supply;
  • Support wide operating temperature range from -40-85°C;
  • 1U, 19-inch Rack-mount Installation;

Mô tả

ICS1028-4GS is an industrial grade, Rack-mount, layer3, Managed Ethernet switch which supports 24*10/100M combo port + 4-port Gigabit SFP. providing sufficient data for aggregation and core data exchange of the bandwidth; to provide high-capacity switching capabilities to support based on the three layers of ACL function. Perfect security control strategy and CPU protection policy to improve fault tolerance and ensure stable operation of the network and link load balancing.

UPCOM ICS1028-4GS not only supports rich Layer 2 software features such as ports, VLANs, multicast, QoS, and fast redundant rings, but also supports static and dynamic routing, multicast routing, and supports multiple management methods of Console, Web, and host computer network management software, can satisfied the requirement of various industrial applications such as Intelligent Transportation System, Security Surveillance, Industrial Automation, Smart Grid, Rail Transportation Industry, Safely City, and New Energy, etc.

Đặc trưng

  • Support 24* 10/100Base combo port +4-port Gigabit SFP;
  • Comply with IEC61850-3 standard;
  • Support RIP, OSPF, PIM Layer 3 Routing protocol;
  • Support MW-Ring, MSTP, VRRP, EAPS redundancy network;
  • Support multiple management methods and network centralized management;
  • Support Front and rear indicator lights design;
  • Support firmware upgrade online;
  • Support relay alarm output;
  • Support indicator status display;
  • Support Broadcast storm suppression;
  • Support dual AC/DC 220V power supply;
  • Power supply input support anti-reverse protection and non-polarity;
  • Support over Voltage, over current, EMC protection;
  • Support wide operating temperature range from -40-85°C;
  • 1U, 19-inch Rack-mount Installation;

Thông số kỹ thuật

Specification
Product  Name 28-Port  layer 3 Gigabit Industrial Ethernet Switch
Product  Model ICS1028-4GS
Port  Definition 24*10/100M  combo port + 4-port Gigabit SFP.
Software performance  
Switch  Function Support  VLAN, GVRP
Support  port speed limit
Support  storm suppression
Support  port aggregation
Support  port flow control
Redundancy  protocol Support  VRRP/EAPS
Support  MW-Ring and the recovery time<20ms
Support  RSTP/MSTP and compatible with STP
Multicast  Routing Support  IGMP snooping/ IGMP v1/v2/v3
Support  GMRP
Support  static multicast
Routing  technology Support  RIPv1 / v2, RIPng, OSPFv1/v2
Support  static routing protocol
Support  PIM-SM, PIM-DM
Service  quality management Support  ACL and L2-L7 data Filter
Support  SP/ WRR queuing
Management  and maintenance Support  Console, Telnet, WEB management mode, RMON
Support  SNMPv1 / v2c
Support  FTP, TFTP file transfer and software upgrade
Support  power failure alarm, power alarm, port alarm, ring alarm
Support  port mirroring, Syslog, LLDP, RTC, SNTPv4
IP  supports DHCP server/relay /client
Technical specifications
Ethernet  Standard IEEE802.3-10BaseT
IEEE802.3u-100BaseTX/100Base-FX
IEEE802.3x-Flow  Control
IEEE802.3z-1000BaseLX
IEEE802.3ab-1000BaseTX
IEEE802.1ab
Ethernet  Standard IEEE802.1D-Spanning  Tree Protocol
IEEE802.1w-Rapid  Spanning Tree Protocol
IEEE802.1Q  -VLAN Tagging
IEEE802.1s  Multiple Spanning Tree Protocol
IEEE802.1p  -Class of Service
IEEE802.1X-Port  Based Network Access Control
GVRP/RIPv1/v2&OSPFv1/v2/v3/VRRP/DHCP/CLI/EAPS/Qos/LACP/LLDP/IGMP/PIM/SNMP/SNTP/SSH
Switch properties
Priority  queue 8
VLAN  ID 4096
IGMP  Groups 512
MAC  table 32k
Switch  Bandwidth 12.8Gbps
Route  Table 8k
Switch  Delay <5μs
Interface
Gigabit  ports Port  numbers: 4
Connector:  SFP for fiber port(LC, single or multi-mode), RJ45 for copper port
Baud  rate: 1000Base-LX(fiber port)
100M  ports Port  numbers:24
Connector:  9 fixed 100BaseF(x) ports(single or multi-mode, SC/FC/ST available)or RJ45
Baud  rate:100Base-FX/adaptive 10/100M-T(x)
Console port RS232/RJ45
Terminal  block for power input 5.08mm  terminal block
Terminal  block for relay alarm 5.08mm  terminal block,1A@24VDC
Communication distance
Twisted-pair 100m(CAT5/CAT5e  cable)
Multimode  fiber Gigabit  multi-mode: 850nm, 550m
Single  mode fiber Gigabit  single mode: 1310nm, 20km
LED indicator lights
Front  panel LED Port  light: LINK/ACT; SPEED
Running  light: RUN
Power  LED: PWR1, PWR2
Alarm  LED: Alarm
Rear  panel LED RJ45  LED: LINK/ACT; SPEED
Fiber  LED: LINK/ACT
Power Requirements
Power  input AC/DC220V(85-264VAC/110-370VDC)
Full-load  consumption <35W  @ full load
Overload  protection Support
Reverse  protection Support
Redundancy  protection Support
Working Environment
Operating  Temperature -40°C~85°C
Storage  temperature -40°C~85°C
Ambient  Humidity 5%~95%(  non-condensing)
Physical Characteristics
Shell IP40  protection, aluminum alloy shell
Installation 19″  1U rack mounted for front and rear outlet installation
Dimension 482.6  mm*44mm*315mm

Download

Tham khảo thêm các sản phẩm khác của Công ty TNHH Công Nghệ và Viễn Thông Hải Phong chúng tôi

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “ICS1028-4GS UPCOM Switch công nghiệp 24 cổng Combo 100M + 4 cổng SFP Gigabit”

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *

X