THÔNG TIN CHI TIẾT

MW70-L: Bộ chống sét cho tín hiệu Ethernet

Liên hệ

MW70-L is designed to protect data communication lines in local and wide area networks up to 100Base-T transmission speeds.

Thông tin chi tiết

Introduction

IEC61000-4-5 and ITU-TK20&K21 are the recognized standards for top quality surge protectors, MW70-L made by the high response surge arresters, the advantage allow clamping voltage and low loss against high speed signal, because it had a low capacitance. Designed to protect data communication lines in local and wide area networks up to 100Base-T transmission speeds.
Features
1.   IEC61000-4-5 and ITU-TK20&K21
2.   The high response surge arresters
3.   Clamping voltage and low loss against high speed signal
4.   Designed by theory of current limited and voltage clamped,
      discharged to ground
5.   Standard:10Base-T/100Base-TX
 
 
Specification  
Standard 10Base-T/100Base-T standard
10/100M signal IEC6100-4-5 and ITU-TK20&21
Nominal discharge current(In) 5 KA(8/20μS)
Working voltage 0-5V
Limit voltage ≤40V
Apply Band rate 100Mbps
Connector RJ45 (F)
The line of protection 4 lines (1, 2, 3, 6)
Insert consumption ≤0.5dB
Delay time ≤1ns
Working temperature -20 to 60°C
Storage temperature -25 to 85°C
Humidity Relative humidity 5% to 95%
power No power supply needed
Consumption No consumption
L×W×H 72mm×42mm×25mm
Shell Alnico
Color Blue
Weight 10g
Warranty 5 years
Approvals FCC, CE, RoHS approvals

index_vender

Gọi ngay để đặt hàng: 0986546768

Hỗ trợ bán hàng:

(04).6259.7265-0986 546 768

Online Support via Yahoo

Hỗ trợ kỹ thuật:

0902 175 848-0904525913

Online Support via Yahoo